Mowers & Tractors

10 Challenger MT655C Tractor. 2010 Challenger MT655C Tractor for Sale in Paxico, KS 66526. This 2010 Challenger MT655C Tractor is field ready. This tractor is powered by a 265 HP diesel engine paired with a CVT transmission. Air Conditioning and Heat. Rear Three Point Hitch and PTO. Worn Down Front Tires. For assistance with Financing, Transportation, Inspection, or if you would like a FREE Vehicle Valuation, please message us through. And we will get right back to you. Options and Standard Features. Again, we make every effort to present accurate and reliable information, use of this information is voluntary, and should only be deemed reliable after an independent review of its accuracy, completeness, and timeliness. Any and all differences must be addressed prior to time of sale. No expressed or implied warranties, including the availability or condition of the equipment listed is made unless otherwise stated in writing. EPA mileage estimates for comparison purposes only. Actual mileage may vary depending on driving conditions, driving habits, and vehicle maintenance. We assume no responsibility for damages incurred after the vehicle leaves our showroom. We are not affiliated with any carrier. Verify with the shipper for an Estimate Time of Arrival to be sure. 2010 Challenger MT655C Tractor for Sale in Paxico, KS 66526 This 2010 Challenger MT655C Tractor is field ready. Specifications Hours: 11,000 Enclosed Cab Air Conditioning and Heat Radio Rear Three Point Hitch and PTO GPS Compatibility MFWD Worn Down Front Tires For assistance with Financing, Transportation, Inspe. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Tractors”. The seller is “fsbovehicles” and is located in this country: US. This item can be shipped to United States.

• Brand: Challenger
• Drive: MFWD
• Engine HP: 265
• For Sale By: Private Seller
• Fuel Type: Diesel
• Hours: 11000
• Make: Challenger
• Mileage: 0
• Model: MT655C
• Year: 2010

Made in AUS by Wheel Mod’s. Adding spacers to your tractors is one of the best improvements one can make. A roll over with the tractor can happen very fast, especially on uneven ground or with a top heavy load. The spacers greatly improve the machine stance giving you a more stable platform all around. Spacers also make running chains much easier for a wonderfully sue footed machine. Wheel Mod’s Pty Ltd wheel spacers have a proven design mated with high quality materials and craftsmanship. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled spacers with a hub flange and a centric lip which carries the weight of the tractor. This design feature is critical to distribute the load on all JOHN DEERE and many other machines. Everything is included in the kit and installation is easy. Wheel Mod’s wheel spacer studs remain on the spacer just like the factory hub, making changing wheels very easy for future maintenance. Please note that some front spacers may interfere with the mid mount mower so please take some measurements before putting an order. The item made from forged aluminum. Designed and CNC machined in Australia. Suitable for FRONT wheels. This item is in the category “Industrial\Heavy Machinery, Parts & Attachments\Heavy Machinery\Tractors”. The seller is “bigeau9″ and is located in this country: AU. This item can be shipped to Australia, United States, New Zealand, United Kingdom, Canada.

• Model: 406200
• Features: WHEEL SPACER
• Make: JOHN DEERE

Made in AUS by Wheel Mod’s. Adding spacers to your tractors is one of the best improvements one can make. A roll over with the tractor can happen very fast, especially on uneven ground or with a top heavy load. The spacers greatly improve the machine stance giving you a more stable platform all around. Spacers also make running chains much easier for a wonderfully sue footed machine. Wheel Mod’s Pty Ltd wheel spacers have a proven design mated with high quality materials and craftsmanship. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled spacers with a hub flange and a centric lip which carries the weight of the tractor. This design feature is critical to distribute the load on all JOHN DEERE and many other machines. Everything is included in the kit and installation is easy. Wheel Mod’s wheel spacer studs remain on the spacer just like the factory hub, making changing wheels very easy for future maintenance. Please note that some front spacers may interfere with the mid mount mower so please take some measurements before putting an order. The item made from forged aluminum. Designed and CNC machined in Australia. Thickness: 3 inch (76mm). Suitable for FRONT wheels. This item is in the category “Industrial\Heavy Machinery, Parts & Attachments\Heavy Machinery\Tractors”. The seller is “bigeau9″ and is located in this country: AU. This item can be shipped to Australia, United States, New Zealand, United Kingdom, Canada.

• Model: 400300
• Features: WHEEL SPACER
• Make: JOHN DEERE

Made in AUS by Wheel Mod’s. Adding spacers to your tractors is one of the best improvements one can make. A roll over with the tractor can happen very fast, especially on uneven ground or with a top heavy load. The spacers greatly improve the machine stance giving you a more stable platform all around. Spacers also make running chains much easier for a wonderfully sue footed machine. Wheel Mod’s Pty Ltd wheel spacers have a proven design mated with high quality materials and craftsmanship. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled spacers with a hub flange and a centric lip which carries the weight of the tractor. This design feature is critical to distribute the load on all JOHN DEERE and many other machines. Everything is included in the kit and installation is easy. Wheel Mod’s wheel spacer studs remain on the spacer just like the factory hub, making changing wheels very easy for future maintenance. Please note that some front spacers may interfere with the mid mount mower so please take some measurements before putting an order. The item made from forged aluminum. Designed and CNC machined in Australia. Thickness: 3 inch (76mm). Suitable for FRONT wheels. This item is in the category “Industrial\Heavy Machinery, Parts & Attachments\Heavy Machinery\Tractors”. The seller is “bigeau9″ and is located in this country: AU. This item can be shipped to Australia, United States, New Zealand, United Kingdom, Canada.

• Model: 405300
• Features: WHEEL SPACER
• Make: JOHN DEERE

Made in AUS by Wheel Mod’s. Adding spacers to your tractors is one of the best improvements one can make. A roll over with the tractor can happen very fast, especially on uneven ground or with a top heavy load. The spacers greatly improve the machine stance giving you a more stable platform all around. Spacers also make running chains much easier for a wonderfully sue footed machine. Wheel Mod’s Pty Ltd wheel spacers have a proven design mated with high quality materials and craftsmanship. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled spacers with a hub flange and a centric lip which carries the weight of the tractor. This design feature is critical to distribute the load on the tractor and many other machines. Everything is included in the kit and installation is easy. Wheel Mod’s wheel spacer studs remain on the spacer just like the factory hub, making changing wheels very easy for future maintenance. Please note that some rear spacers may interfere with the mid mount mower so please take some measurements before putting an order. The item made from forged aluminum. Designed and CNC machined in Australia. Thickness: 3 inch (76mm). Suitable for FRONT wheels, 6 studs. This item is in the category “Industrial\Heavy Machinery, Parts & Attachments\Heavy Machinery\Tractors”. The seller is “bigeau9″ and is located in this country: AU. This item can be shipped to Australia, United States, New Zealand, United Kingdom, Canada.

• Model: JD3F
• Features: WHEEL SPACER
• Make: JOHN DEERE

Made in AUS by Wheel Mod’s. Adding spacers to your tractors is one of the best improvements one can make. A roll over with the tractor can happen very fast, especially on uneven ground or with a top heavy load. The spacers greatly improve the machine stance giving you a more stable platform all around. Spacers also make running chains much easier for a wonderfully sue footed machine. Wheel Mod’s Pty Ltd wheel spacers have a proven design mated with high quality materials and craftsmanship. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled spacers with a hub flange and a centric lip which carries the weight of the tractor. This design feature is critical to distribute the load on all JOHN DEERE and many other machines. Everything is included in the kit and installation is easy. Wheel Mod’s wheel spacer studs remain on the spacer just like the factory hub, making changing wheels very easy for future maintenance. Please note that some rear spacers may interfere with the mid mount mower so please take some measurements before putting an order. The item made from forged aluminum. Designed and CNC machined in Australia. Suitable for REAR wheels. This item is in the category “Industrial\Heavy Machinery, Parts & Attachments\Heavy Machinery\Tractors”. The seller is “bigeau9″ and is located in this country: AU. This item can be shipped to Australia, United States, New Zealand, United Kingdom, Canada.

• Model: 405200
• Features: WHEEL SPACER
• Make: JOHN DEERE

Made in AUS by Wheel Mod’s. Adding spacers to your tractors is one of the best improvements one can make. A roll over with the tractor can happen very fast, especially on uneven ground or with a top heavy load. The spacers greatly improve the machine stance giving you a more stable platform all around. Spacers also make running chains much easier for a wonderfully sue footed machine. Wheel Mod’s Pty Ltd wheel spacers have a proven design mated with high quality materials and craftsmanship. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled spacers with a hub flange and a centric lip which carries the weight of the tractor. This design feature is critical to distribute the load on all JOHN DEERE and many other machines. Everything is included in the kit and installation is easy. Wheel Mod’s wheel spacer studs remain on the spacer just like the factory hub, making changing wheels very easy for future maintenance. Please note that some rear spacers may interfere with the mid mount mower so please take some measurements before putting an order. The item made from forged aluminum. Designed and CNC machined in Australia. Thickness: 2.5 inch. Suitable for REAR wheels. This item is in the category “Industrial\Heavy Machinery, Parts & Attachments\Heavy Machinery\Tractors”. The seller is “bigeau9″ and is located in this country: AU. This item can be shipped to Australia, United States, New Zealand, United Kingdom, Canada.

• Model: 404250
• Features: WHEEL SPACER
• Make: JOHN DEERE

Made in AUS by Wheel Mod’s. Adding spacers to your tractors is one of the best improvements one can make. A roll over with the tractor can happen very fast, especially on uneven ground or with a top heavy load. The spacers greatly improve the machine stance giving you a more stable platform all around. Spacers also make running chains much easier for a wonderfully sue footed machine. Wheel Mod’s Pty Ltd wheel spacers have a proven design mated with high quality materials and craftsmanship. Our spacers are made from forged aerospace aluminum with high quality zinc plate studs and nuts. They are one piece, milled spacers with a hub flange and a centric lip which carries the weight of the tractor. This design feature is critical to distribute the load on all JOHN DEERE and many other machines. Everything is included in the kit and installation is easy. Wheel Mod’s wheel spacer studs remain on the spacer just like the factory hub, making changing wheels very easy for future maintenance. Please note that some front spacers may interfere with the mid mount mower so please take some measurements before putting an order. The item made from forged aluminum. Designed and CNC machined in Australia. Suitable for FRONT wheels. This item is in the category “Industrial\Heavy Machinery, Parts & Attachments\Heavy Machinery\Tractors”. The seller is “bigeau9″ and is located in this country: AU. This item can be shipped to Australia, United States, New Zealand, United Kingdom, Canada.

• Model: 400200
• Features: WHEEL SPACER
• Make: JOHN DEERE