Mowers & Tractors

19 Case IH Magnum 380 CVT Tractor. 2019 CASE IH MAGNUM 380 CVT Tractor for Sale in Hampton, NE 68843. This 2019 Case Is Offered for Sale and Ready to Work. 2019 Magnum 380 CVT. 1,481 hours on it, and that should stay pretty much the same. Been a great tractor for us, we’re just upgrading. Michelin Agribibs all around and the cast spacers for front duals. Full set of weights front and back, the rear outside ones will be put back on. 6 remotes, as well as hydraulic center link. Pretty much fully loaded inside and out. Trimble TMX 2050 with a picture of all the unlocks. It does have most that are offered. We will sell it without the Trimble but would like to make it a package deal. The pro 700 will also go with it. It also has the 31-mph transmission. Well maintained, and always shedded. For Assistance with Financing, Transportation, Inspection Or, If You Would Like A FREE Vehicle Valuation, Please. And We Will Get Right Back To You. Options and Standard Features. Again, we make every effort to present accurate and reliable information, use of this information is voluntary, and should only be deemed reliable after an independent review of its accuracy, completeness, and timeliness. Any and all differences must be addressed prior to time of sale. No expressed or implied warranties, including the availability or condition of the equipment listed is made unless otherwise stated in writing. EPA mileage estimates for comparison purposes only. Actual mileage may vary depending on driving conditions, driving habits, and vehicle maintenance. We assume no responsibility for damages incurred after the vehicle leaves our showroom. We are not affiliated with any carrier. Verify with the shipper for an Estimate Time of Arrival to be sure. 2019 CASE IH MAGNUM 380 CVT Tractor for Sale in Hampton, NE 68843 This 2019 Case Is Offered for Sale and Ready to Work. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Tractors”. The seller is “fsbovehicles” and is located in this country: US. This item can be shipped to United States.

• Brand: Case IH
• Drive: MFWD
• Engine HP: 380
• For Sale By: Private Seller
• Fuel Type: Diesel
• Hours: 1481
• Make: Case IH
• Mileage: 0
• Model: Magum
• Year: 2019

19 Case IH Magnum 380 CVT Tractor. 2019 CASE IH MAGNUM 380 CVT Tractor for Sale in Hampton, NE 68843. This 2019 Case Is Offered for Sale and Ready to Work. 2019 Magnum 380 CVT. 1,481 hours on it, and that should stay pretty much the same. Been a great tractor for us, we’re just upgrading. Michelin Agribibs all around and the cast spacers for front duals. Full set of weights front and back, the rear outside ones will be put back on. 6 remotes, as well as hydraulic center link. Pretty much fully loaded inside and out. Trimble TMX 2050 with a picture of all the unlocks. It does have most that are offered. We will sell it without the Trimble but would like to make it a package deal. The pro 700 will also go with it. It also has the 31-mph transmission. Well maintained, and always shedded. For Assistance with Financing, Transportation, Inspection Or, If You Would Like A FREE Vehicle Valuation, Please. And We Will Get Right Back To You. Options and Standard Features. Again, we make every effort to present accurate and reliable information, use of this information is voluntary, and should only be deemed reliable after an independent review of its accuracy, completeness, and timeliness. Any and all differences must be addressed prior to time of sale. No expressed or implied warranties, including the availability or condition of the equipment listed is made unless otherwise stated in writing. EPA mileage estimates for comparison purposes only. Actual mileage may vary depending on driving conditions, driving habits, and vehicle maintenance. We assume no responsibility for damages incurred after the vehicle leaves our showroom. We are not affiliated with any carrier. Verify with the shipper for an Estimate Time of Arrival to be sure. 2019 CASE IH MAGNUM 380 CVT Tractor for Sale in Hampton, NE 68843 This 2019 Case Is Offered for Sale and Ready to Work. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Tractors”. The seller is “fsbovehicles” and is located in this country: US. This item can be shipped to United States.

• Brand: Case IH
• Drive: MFWD
• Engine HP: 380
• For Sale By: Private Seller
• Fuel Type: Diesel
• Hours: 1481
• Make: Case IH
• Mileage: 0
• Model: Magum
• Year: 2019

1989 Case IH 9150 Tractor. Engine: CUMMINS LTA10-A /280HP. New Exhaust (recent installation/not in photos). New Draw bar and Hitch. 2 New rear tires. New hoses, fluid, etc… This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Tractors”. The seller is “transitpower2018″ and is located in this country: US. This item can be shipped to United States.

• Make: Case
• Model Year: 1989
• Engine HP: 280
• Model: Case 9150
• Equipment Type: Farm Tractor
• Fuel Type: Diesel
• Serial Number: JCB0003021

19 Case IH Magnum 380 CVT Tractor. 2019 Case IH Magnum 380 CVT Tractor for Sale in Hampton, NE 68843. This 2019 Case IH Magnum 380CVT Tractor is ready to work. This has been a great tractor for us, we’re just upgrading. Michelin agribibs all around and the cast spacers for front duals. Full set of weights front and back, the rear outside ones will be put back on. 6 remotes, as well as hydraulic center link. Pretty much fully loaded inside and out. Trimble TMX 2050 with a picture of all the unlocks. It does have most that are offered. We will sell it without the Trimble but would like to make it a package deal. The pro 700 will also go with it. It also has the 31-MPH transmission. Well maintained, and always shedded. Dual Front and Rear Tires. Front and Rear Weights. For assistance with Financing, Transportation, Inspection, or if you would like a FREE Vehicle Valuation, please message us through. And we will get right back to you. Options and Standard Features. Model: Magnum 380 CVT. Again, we make every effort to present accurate and reliable information, use of this information is voluntary, and should only be deemed reliable after an independent review of its accuracy, completeness, and timeliness. Any and all differences must be addressed prior to time of sale. No expressed or implied warranties, including the availability or condition of the equipment listed is made unless otherwise stated in writing. EPA mileage estimates for comparison purposes only. Actual mileage may vary depending on driving conditions, driving habits, and vehicle maintenance. We assume no responsibility for damages incurred after the vehicle leaves our showroom. We are not affiliated with any carrier. Verify with the shipper for an Estimate Time of Arrival to be sure. 2019 Case IH Magnum 380 CVT Tractor for Sale in Hampton, NE 68843 This 2019 Case IH Magnum 380CVT Tractor is ready to work. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Tractors”. The seller is “fsbovehicles” and is located in this country: US. This item can be shipped to United States.

• Brand: Case IH
• Drive: MFWD
• Engine HP: 380
• For Sale By: Private Seller
• Fuel Type: Diesel
• Hours: 1481
• Make: Case IH
• Mileage: 0
• Model: Magnum 380 CVT
• Year: 2019

CASE JX70 TRACTOR, 3 CYL. TURBO DIESEL, 62 H. GEAR SHIFT 12F12R WITH LEFT HAND FORWARD/REVERSE, 2X4, 1 REAR REMOTE, 16.9-30 REAR TIRES, TRACTOR STARTS RUNS AND DRIVES. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Tractors”. The seller is “tbirdmcp” and is located in this country: US. This item can be shipped to United States.

• Model Year: 2007
• Make: Case

14 Case IH Magnum 290. 2014 CASE IH MAGNUM 290 Tractor for Sale in Sedalia, MO 65301. Number of Front Weights. For assistance with Financing, Transportation, Inspection or, if you would like a FREE Vehicle Valuation, please. And we will get right back to you. Options and Standard Features. Again, we make every effort to present accurate and reliable information, use of this information is voluntary, and should only be deemed reliable after an independent review of its accuracy, completeness, and timeliness. Any and all differences must be addressed prior to time of sale. No expressed or implied warranties, including the availability or condition of the equipment listed is made unless otherwise stated in writing. EPA mileage estimates for comparison purposes only. Actual mileage may vary depending on driving conditions, driving habits, and vehicle maintenance. We assume no responsibility for damages incurred after the vehicle leaves our showroom. We are not affiliated with any carrier. Verify with the shipper for an Estimate Time of Arrival to be sure. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Tractors”. The seller is “fsbovehicles” and is located in this country: US. This item can be shipped to United States.

• Brand: Case IH
• Engine HP: 290
• For Sale By: Private Seller
• Fuel Type: Diesel
• Hours: 3495
• Make: Case IH
• Mileage: 0
• Model: Magnum 290
• Serial Number: ZDRD09073
• Transmission: Power Shift
• Year: 2014

Tractor end has 21, 1-3/8 splines. The implement yoke has 1-1/2 round bore with keyway. The clamp bolt is included. This is a complete replacement, components from original will not interchange. Fits Case-IH and Hesston mower conditioners. Complete Replacement – Components From Original Will Not Interchange. This item must be cut to length. (1 to 4 of 4). A & I MEGA-CROSS. Driveline (by application) > CV Driveline Assembly. Case-IH MOWER CONDITIONER: 8312 (Without Swivel Hitch). Hesston MOWER CONDITIONER: 1340 (Without Swivel Hitch). Driveline > CV Driveline Assembly. Walterscheid WWZ Series: 2580. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Tractors”. The seller is “oktractor” and is located in this country: US. This item can be shipped to United States.

Oliver / Minneapolis Moline. Double CV PTO Driveline Fits Case IH 8312 Hesston 1340 700723457SPL. One New Aftermarket Replacement Double CV Driveline that fits several Fits Case IH and Hesston Models. Also fits Walterscheid WWZ Model 2580. Tractor 1 3/8-21 Spline Implement 1 1/2-RB W/KW Replaces Part Numbers DRF30-0020, 700723575N, 700723457SPL. Good product, as described. 15 AMP STATOR KIT fits KOHLER 237878-S / K301 K321 K341 P7-01710 #. GAUGE AMP Fits Case DC DS VAC Tractor #. Litem came quick and in great shape thanks. Idler Pulley Square Rail 144C56 for Chamberlain LiftMaster Garage Door Opener #. Never had better service since 2007. 4 days early fit perfectly. (2) 130794 Craftsman Spindle Mandrel For Poulan Fits Husqvarna 36″ 38″ 42 #. Was just what i needed. Ignition Switch for Craftsman Riding Lawn Mower Lawn Tractor STD 365402 5 Spade #. 20 Yellow Fuel Gas Can Jug Vent Cap Rotopax Gott Rubbermaid Chilton Brigg Anchor #. 5 Primer Bulb Fits Stihl FS38 FS45 FS46 FS55 FS72 FS80 FS85 FS87 String Trimmers #. Clutch Alignment Tool Fits John Deere Tractor 27 splines 10 splines #. Oil Pressure Switch For Generac G099236 99236GS 99236 099236 Generators #. POWER STEERING WHEEL CAP Fits IH FARMALL 504 584 656 706 806 856 986 1086 1 #. 10 G70 5/16 Weld On Chain Grab Hooks Bucket Flatbed Trailer Wrecker Tie Down #. 109331 Hydraulic Filter – Spin On – HF6513 Fits Donaldson Filters #. D28129 One Replacement Belt For Great Dane #. Set of 2 42 Riding Lawn Mower Deck Belt for Craftsman #144959 #. 5 – Plow Bolt & Nut for Blades / Cutting Edge, 5/8-11×2 1/4 – Grade 8, Dome Head #. Pair of Fits CAT 1 Quick Hitch Adapter Bushings-Category 1-3 Pt Tractor Busing S #. D1NN8151A & C9NN8A163AG Upper & Lower Grill Set Fits Ford Tractor 2000 3000 #. Hope to deal with you again. NEW INJECTOR SEAL KIT Fits Ford TRACTOR 2000 2600 2610 3000 3600 4000 4600 5000 #. 25-2 Trimmer Head Spring Fits Stihl DR60 FS44 FS56 FS65 FS66 FS70 FS74 FS80 FS83 #. APN6731B Oil Filter Fits Ford 2N 8N 9N Tractors #. Very nice thank you. Sediment Bowl with Shut Off Valve fits Ford Tractor 8N, 2N 2N9155B #. Seal kit was just as described. Good material as well. 1124732C94 Lift Angle Cylinder Seal Kit Fits IH Dresser TD7C TD7H TD8H #. Fast shopping, good price. Oil Plug SBA398430560 Fits Ford Fits New Holland 1000 1500 1600 1700 1900 1910 2 #. Can I return an item that is defective, damaged, or I just don’t want? Please save all the original packaging! If you receive an item that is not as described in the listing. Normally same day if before 1PM EST. Many things can play a factor such as Location, Weather, and the items in the order. If you have any questions, please reach out to us before ordering. How do I know if my order was submitted properly? Reliable Aftermarket Parts, Inc® – Our Name Says it All! Reliable Aftermarket Parts is a worldwide leading supplier and distributor of aftermarket agricultural and construction parts. We offer parts for all the top name brands as well as the harder to find equipment. While we started in agriculture parts, we have expanded into industrial, construction, and lawn and garden markets with plans to continue to develop and provide more options in other outdoor products and their accessories. Our tireless mission is creating winning solutions for aftermarket products via the internet. Reliable Aftermarket Parts was founded in 2009 by president and owner, Tom “Junior” Salisbury, from a simple notion that we would be the first to offer quality products in a new way at competitive prices with a better guarantee of quality. Tom started with a small online store in his basement and a will to achieve tremendous progress in an industry stuck in traditional salvage yard thinking. We have grown enormously and continue to thrive because of his values and what they represent to us as a company. Reliable Aftermarket Parts’ core values are to be Reliable, Innovative, and Tenacious. Able to be trusted, dependable, and consistently good in quality or performance. Introducing new creative ideas, featuring new methods that are original in thinking. Competitively growth oriented and determined to hold high standards with passion and energy. We have been featured on the cover of Greater Lansing Business Monthly for receiving the 2013 Sales and Distribution Entrepreneur of the Year award. We have also been presented 2014 Michigan 50 Companies to Watch by Governor Rick Snyder and Michigan Celebrates Small Business. Additionally, we are honored to hold accolades from Independent Distributors Association Worldwide for the Heavy Equipment Industry category with Tom being a board member. National Tractor Parts Dealer Association has also bestowed us with praises and membership. These honors propel us to continue to forge forward and fulfill our mission statement. We hope you enjoy our products as much as we enjoy offering them to you. The Reliable Aftermarket Parts Team. Add to Favourite Sellers. Sign up to Newsletter. This listing is currently undergoing maintenance, we apologize for any inconvenience caused. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Tractors”. The seller is “reliableaftermarketpartsinc” and is located in this country: US. This item can be shipped worldwide.

• MPN: 700723457SPL, 700723457SPL-A
• Compatible Equipment Make: For Case/International Harvester
• Part Type: Driveline
• Number of Items: 1

16 Case IH Steiger 500 HD. 2016 Case IH Steiger 500 HD. For Sale In Waukon, IA 52172. Serial Number – ZFF308267. Hours – 4,900. Fuel Type – Diesel. For assistance with Financing, Transportation, Inspection, or if you would like a FREE Vehicle Valuation please. Options and Standard Features. Model: Steiger 500 HD. Again, we make every effort to present accurate and reliable information, use of this information is voluntary, and should only be deemed reliable after an independent review of its accuracy, completeness, and timeliness. Any and all differences must be addressed prior to time of sale. No expressed or implied warranties, including the availability or condition of the equipment listed is made unless otherwise stated in writing. EPA mileage estimates for comparison purposes only. Actual mileage may vary depending on driving conditions, driving habits, and vehicle maintenance. We assume no responsibility for damages incurred after the vehicle leaves our showroom. We are not affiliated with any carrier. Verify with the shipper for an Estimate Time of Arrival to be sure. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Tractors”. The seller is “fsbovehicles” and is located in this country: US. This item can be shipped to United States.

• Brand: Case IH
• Drive: 4WD
• Engine HP: 500
• For Sale By: Private Seller
• Hours: 4900
• Make: Case IH
• Mileage: 0
• Model: Steiger 500 HD
• Serial Number: ZFF308267
• Year: 2016

Used Spindle Came off tractor with only 2 hours of use! Complete with Hub and bearings. RH/LH International 244 254 1271894C2 fits Case IH 255 245. Compatible with Case IH Tractor(s) 245, 255. Replaces Case IH OEM 1271894C2. Compatible with International Tractor(s) 244, 254. Replaces International OEM 1271894C2. Upper Shaft Length: 8.188. Upper Shaft Diameter: 1.023. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Tractors”. The seller is “bigtom327″ and is located in this country: US. This item can be shipped to United States.

• Series: case ih245
• Transmission: Manual
• Model: case 244 254 case ih 245 255
• Drive: 2WD
• Make: Case
• MPN: 1271894C2
• Equipment Type: Compact Tractor
• Engine Cylinders: 3
• Fuel Type: Diesel